Insert blade (J) through slot in the side of the motor assembly (C), ensuring the “THIS SIDE UP” label faces the ceiling. Then re-insert the mounting bracket screws (M) and securely tighten all screws.Ģ. Slide the canopy (B) over the mounting bracket (A), aligning the slotted holes in the canopy (B) with the pre-loosened mounting bracket screws (M) in the mounting bracket (A). Loosen all four mounting bracket screws (M), then completely remove two mounting bracket screws (M) from opposite sides of the mounting bracket (A). Place the Green and White wire connections on the opposite side of the outlet box from the Black. WARNING: Ensure no wire strands are visible after making connections. Turn the spliced/taped wires upward and gently push the wires and wire connectors (AA) into the outlet box. Wrap electrical tape (not included) around each individual wire connector (AA) down to the wire.ģ. If supply wires are different colors than referred to above, a professional electrician should determine the proper wiring.Ģ. The White wire is neutral for the fan and light kit. Note: The Black wire is hot power for the fan. Secure all wiring connections together with wire connectors (AA).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |